Toyo
Showing 1–12 of 17 results
-
TC 100
Read moreThe TC100 controller is specially designed for use with Toyo’s servo-type cylinders and electric gripper products.
-
TOYO Arm Type 3 Axis
Read moreMulti Axis Ball Screw Type Actuator
- Arm Type 3 Axis
- Y axis moving Type
- ETH12, ETH12 & ETH6M Connected
- Maximum Speed: 500 mm/sec (X & Y Axis)
- Available Stroke Lengths: 100-800 mm (X Axis) ; 50-350 mm (Y Axis)
-
TOYO ECB Series
Read moreClean Room Belt Actuator replaces the ball screw in the ECH series with a Belt drive.
- Repeatability: ± 0.04 (mm)
- Horizontal Maximum Payload from 10 (kg)
- Maximum Speed: 2000 mm/sec
- Available Stroke Lengths: 100-800 mm
-
TOYO ECH Series
Read moreClean Room Ball Screw Actuators offer great reliability and are built for environments with higher safety standards.
- Repeatability: ± 0.005 (mm)
- Horizontal Maximum Payload from 15kg to150kg
- Vertical Maximum Payload from 7kg to 55kg
- Maximum Speed: 250 mm/sec to 2000 mm/sec
- Available Stroke Lengths: 50-1500 mm
-
TOYO ETB Series
Read moreStandard Belt Actuators use smooth belt motion negating ball screw cost and maintenance.
- Repeatability: ± 0.04 (mm)
- Horizontal Maximum Payload from 10 (kg)
- Maximum Speed: 2000 mm/sec
- Available Stroke Lengths: 100-800 mm
-
TOYO ETH Series
Read moreBall screw driven actuators offer superior repeatability at a variety of payload options.
- Repeatability: +0.005 (mm)
- Horizontal Range from 13 kg up to 150kg
- Vertical Range from 6kg to 55kg
- Max Speed: 250mm/s to 2,000mm/s (w/ 40mm lead)
- Available Stroke Lengths: 50-2400mm
- All ratings based on 10,000km travel life
-
TOYO Gantry Type 3 Axis
Read moreMulti Axis Ball Screw Type Actuator can be used and assembled in your coating device application.
- Gantry Type 3 Axis
- The Type w/ a Guide Railing at the End of Y Axis for Support
- ETH17 & ETH14 Connected
- Maximum Speed: 1000 mm/sec (X & Y Axis)
- Available Stroke Lengths: 100-1250 mm (X Axis) ; 200-850 mm (Y Axis)
-
TOYO GTH Actuator
Read moreGTH Series is the next generation of the well known and widely used ETH Series. The Toyo GTH Series 4, 5, 8, and 12 replaces the ETH 5, 6, 10 and 12 and offers improved features and upgrades in a smaller frame size for equal load ratings.
- Repeatability: +0.005 (mm)
- Horizontal Range 10kg to 110kg
- Vertical Range 2kg to 33kg
- Maximum Speed: 100mm/s to 1600mm/s (w/ 32mm lead)
- Available Stroke Lengths: 50-1250 mm
* All ratings based on 10,000km travel life
-
TOYO GTY Series
Read moreThe GTY series, an internally guided rod style actuator, builds upon the design improvements of the GTH model, and completely replaces the previous Y series from Toyo.
- Repeatability: +0.01 (mm)
- Horizontal Range 12kg to 110kg
- Vertical Range 2kg to 33kg
- Maximum Speed: 1600mm/s (w/ 32mm lead)
- Available Stroke Lengths: 50-800 mm
Max Thrust: 1388N
* All ratings based on 10,000km travel life
-
TOYO XYTB760-A
Read moreMulti Axis Belt Type Actuator can be assembled for a 3- dimensional rubberizing device.
- Arm Type 2 Axis
- Y axis moving Type
- ETB17M & ETH14 Connected
- Maximum Speed: 2000 mm/sec (X Axis) ; 1000 mm/sec (Y Axis)
- Available Stroke Lengths: 550-4050 mm (X Axis) ; 100-650 mm (Y Axis)
-
TOYO XYTB870-A
Read moreMulti Axis Belt Type Actuator can be assembled for a 3- dimensional rubberizing device.
- Arm Type 2 Axis
- Y axis moving Type
- ETB22M & ETH17 Connected
- Maximum Speed: 2000 mm/sec (X Axis) ; 1000 mm/sec (Y Axis)
- Available Stroke Lengths: 550-4050 mm (X Axis) ; 100-650 mm (Y Axis)
-
TOYO XYTB870-G
Read moreMulti Axis Belt Type Actuator can be assembled for a 3- dimensional rubberizing device.
- Gantry Type 2 Axis
- Type w/ Guide Railing Y Axis Support End
- ETB22M & ETH17 Connected
- Maximum Speed: 2000 mm/sec (X Axis) ; 1000 mm/sec (Y Axis)
- Available Stroke Lengths: 500-4050 mm (X Axis) ; 100-750 mm (Y Axis)